Availability / Cost:

        Molly Maguire-In Stock $500 USD + shipping In V-brake model

       Working Class Hero - Sold Out

How much does the frame weigh?

            The frame weighs 5.125 lbs.

Seat post Size? 

            25.4mm

 How is your bike unique?

            We think our frames geometry is unique compared to most mountain bikes with a steep head-tube, short rear chain-stays and short overall wheelbase allowing the bike to be ridden in tight jumps, tighter transitions, and other places big wheeled bikes typically did not work as well as 20” bikes.  

Why a 110 mm rear end?

            We wanted to use a peg and 14mm axle and while there are 135mm 14mm hubs available we didn't think there were any available at the quality level we desired. Odyssey and Profile hubs are both completely serviceable and are much less expensive than a comparable MTB hub.

Why is the head-tube so steep?

            Again it is to allow the frame to be more responsive and nimble and allows you to better weight the front end, at 71.75 degrees under full compression the head-angle  will change to approximately 74 degrees still less than the average park/dirt BMX bike.  

 Are you looking to sponsor any riders?

            I wish we could at this time but as we try and start our business we simply can’t accept any offers at this time, hopefully we will be able to grow and start a grass roots program.

   What is a Spanish Bottom Bracket?

            The Spanish bottom bracket was developed in the BMX world as an alternative to the Euro and American styles, and is lighter than either option. Spanish Bottom Brackets uses bearings much larger than a Euro bottom bracket for BMX style cranks and is available to fit either 19mm or 22mm spindles. By pressing directly into the frame (which has been carefully faced) it allows for an easy installation and the bearings are inexpensive to replace.

 Are there any suggested forks?

            We designed the bike around an 80mm Sherman Fork but have ridden it with Fox and Marzocchi forks in varying lengths from 60-100 millimeters.

Is there a warranty?

    90 Day Warranty against Manufacturing Defects

If you buy an UNION-STREET frame with a manufacturing defect, UNION-STREET will replace this frame if the warranty department is contacted within 90 days of purchase of the frame. Detecting the manufacturing defect could occur prior to assembling you frame or while riding the frame during the first 90 days, but it is in this first 90 days that manufacturing defects must be found for a free replacement. After the first 90 days any defects in workmanship will not be covered by the warranty.
Only available to the original owner.

• Before assembling your new UNION-STREET frame, take some time to inspect it closely. If you notice anything that doesn’t seem correct, contact us immediately. Upon discussion of the problem it seems like there is a defect send the frame and your proof of purchase to the UNION-STREET warranty department. When we receive the frame we will inspect it and if there is a manufacturing defect, we will replace your frame at no charge.

• If you notice anything that doesn’t seem correct during assembly of your UNION-STREET frame or after the frame is assembled and you have begun riding it, contact us immediately. Do not try to fix the problem in any way. Any further damage caused to the frame while trying to repair it will not be covered by the warranty.  When we receive the frame we will inspect it and if there is a manufacturing defect, we will replace your frame at no charge.

    12 Month Warranty against Breakage

If during the first 12 months after the purchase of your UNION-STREET frame it breaks, you will have the option of purchasing a replacement frame at a reduced price. Frames that have been intentionally damaged will not be covered.
Only available to the original owner.